|Electric distribution system||%||Description|
|Portion of distribution system with SCADA due to SGIG/SGD program||0.00%|
|Portion of distribution system with DA due to SGIG/SGD program||100.00%||40 circuits on the system are tied together using an automated switching scheme. The circuits communicate through simple RTU logic and SCADA to determine when to open or close. There is a 3 minute window for the switching to occur. The total system is 100 circuits.|
|DA devices installed and operational||Quantity*||Description||Cost|
|Automated feeder switches||29||29 S&C Intellirupter switches have been installed. They are controlled by internal logic.||$24,493|
|Remote fault indicators||0||$0|
|Transformer monitors (line)||0||$0|
|Fault current limiter||0||$0|
|SCADA and DA communications network||Cost|
|Communications equipment and SCADA||$0|
|Distribution management systems integration||Integrated||Description|
|Outage management system||No|
|Distributed energy resource interface||No|
|Distribution automation features / functionality||Function enabled||Description|
|Fault location, isolation and service restoration (FLISR)||No||N/A|
|Feeder peak load management||No||N/A|
* In some circumstances, costs are incurred before devices are installed resulting in a reported cost where the quantity is zero.
* All dollar figures are the total cost, which is the sum of the federal investment and cost share of the recipient (the recipient cost share must be at least 50% of the total overall project cost).
** In some cases the number of entities reporting is greater than the total number of projects funded by the Recovery Act because some projects have multiple sub-projects that report data. View list of sub-projects.