ATK Launch Systems

Integrated, Automated DG Technologies Demonstration – Phase I Extension

Project data has not yet been submitted.

Abstract

ATK Launch Systems in Promontory, Utah comprises over 540 buildings on a sprawling 19,900-acre site accessible by 75 miles of roads. Their power system of three main substations and 60 miles of power lines deliver about 17 MW (on-peak) to the facilities, with an annual energy bill of over $15 million. The objective of this project is to "develop and demonstrate a diverse system of renewable distributed generation technologies that are integrated into an intelligent automation system with two-way communications to the utility and that will produce an on-demand reduction of 15% of substation load." The ATK Launch Systems Demonstration Project technology includes: Renewable Energy Sources, which are waste heat recovery systems – 100 kW of generation, wind turbines (water pumping/compressed air storage) – 100 kW total capacity, and 500 kW of total storage capacity. The wind and waste heat generators will provide energy to recharge the storage systems. The project includes load aggregation and monitoring, fault detection and diagnostics, remote monitoring and control, two-way customer-utility web interface, black start, historical trending and reports, as well as alarm and event notification.

Contact Information

Tom George
Technical Project Officer
National Energy Technology Laboratory
3610 Collins Ferry Road
Morgantown, WV 26507-0880
304-285-4825
Tom.George@netl.doe.gov

Kevin Jensen
Principal Investigator
ATK Launch Systems Inc
P.O. Box 707
Corinne, UT 84307-9501
435-863-5379
KevinR.Jensen@ATK.com

At-A-Glance
Recipient: ATK Launch Systems (Integrated, Automated DG Technologies Demonstration – Phase I Extension)
HQ State: Utah
NERC Region:
Total Budget: $2,685,162
Federal Share: $2,148,129
 
Funding Program:
Project Type:
 
Equipment:
Targeted Benefits:
  • Demonstrate a working microgrid
  • Data collection for renewable generation
  • Lower energy costs